
SUMMARY STEPS
1.
interface Dot11Radio 0
2.
tx-pwr power-percentage
DETAILED STEPS
PurposeCommand or Action
Enters radio interface mode, indicated by the ap(config-if) prompt.interface Dot11Radio 0
Example:
ap(config)# interface Dot11Radio 0
Step 1
Configures the transmit power, as a percentage of the maximum
power.
tx-pwr power-percentage
Example:
ap(config-if)# tx-pwr 60
Step 2
power-percentage—specifies the power percentage. The following
values are possible:
•
20
•
40
•
60
•
80
•
100
Configuring WMM Options
To configure WiFi Multimedia (WMM) options, follow these steps from global configuration mode :
SUMMARY STEPS
1.
interface Dot11Radio 0
2.
[no] wmm [auto | no-ack | apsd]
DETAILED STEPS
PurposeCommand or Action
Enters radio interface mode, indicated by the ap(config-if) prompt.interface Dot11Radio 0
Example:
ap(config)# interface Dot11Radio 0
Step 1
Cisco 800 Series Integrated Services Routers Software Configuration Guide
248 OL-31704-02
Configuring Wireless Devices
Configuring WLAN Using the CLI-based Interface
Comments to this Manuals