Cisco 4G-LTE-ANTM-O-3 Installation Guide download pdf (Page 403)

SUMMARY STEPS

Connect an ASCII terminal or a PC running a terminal emulation program to the CONSOLE port on the

Fthe router.

Configure the terminal to operate at 9600 baud, 8 data bits, no parity, and 1 stop bit.

At the privileged EXEC prompt (router_name #), enter the show version command to display the existing

configuration register value (shown in bold at the bottom of this output example):

Record the setting of the configuration register.

To enable the break setting (indicated by the value of bit 8 in the configuration register), enter the

config-register 0x01 command from privileged EXEC mode.

DETAILED STEPS

Step 1

Connect an ASCII terminal or a PC running a terminal emulation program to the CONSOLE port on the Fthe router.

Step 2

Configure the terminal to operate at 9600 baud, 8 data bits, no parity, and 1 stop bit.

Step 3

At the privileged EXEC prompt (router_name #), enter the show version command to display the existing configuration

Example:

Router# show version

Cisco IOS Software, C880 Software (C880-ADVENTERPRISEK9-M), Version 12.3(nightly

.PCBU_WIRELESS041110) NIGHTLY BUILD, synced to haw_t_pi1_pcbu HAW_T_PI1_PCBU_200

40924

Compiled Thu 11-Nov-04 03:37 by jsomebody

ROM: System Bootstrap, Version 1.0.0.6(20030916:100755) [jsomebody],

DEVELOPMENT SOFTWARE

Router uptime is 2467 minutes

System returned to ROM by power-on

System image file is "flash:c880-adventerprisek9-mz.pcbu_wireless.041110"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco 877 (MPC8272) processor (revision 0x00) with 59392K/6144K bytes of memory.

Processor board ID

MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10

4 FastEthernet interfaces

1 ATM interface

1 802.11 Radio

128K bytes of non-volatile configuration memory.

20480K bytes of processor board System flash (Intel Strataflash)

Configuration register is 0x2102

Step 4

Record the setting of the configuration register.

Step 5

To enable the break setting (indicated by the value of bit 8 in the configuration register), enter the config-register 0x01

command from privileged EXEC mode.

• Break enabled—Bit 8 is set to 0.

Cisco 800 Series Integrated Services Routers Software Configuration Guide

OL-31704-02 375

Troubleshooting Cisco 800 Series Routers

Change the Configuration Register

1 2 ... 398 399 400 401 402 403 404 405 406 407 408 ... 443 444

Comments to this Manuals

No comments

Cisco 4G-LTE-ANTM-O-3 Installation Guide Page 403

Comments to this Manuals

Related products and manuals for Routers Cisco 4G-LTE-ANTM-O-3