Cisco 4G-LTE-ANTM-O-3 Installation Guide Page 161

  • Download
  • Add to my manuals
  • Print
  • Page
    / 444
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 160
PurposeCommand or Action
Exits configuration mode.end
Example:
Router(config-if)# end
Step 5
What to Do Next
For additional information, see the information at the following URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/ layer2.html
VLANs on the GE Port and GE ESW Port of Wireless APs
Because the GE port is an internal interface that services only the embedded access point of the router, it
cannot be configured only with the switchport access vlan X command, where X is other than 1. It may,
however, be configured in trunk mode. This may be done by performing the following steps, beginning in
global configuration mode.
SUMMARY STEPS
1.
interface type number
2.
switchport mode trunk
3.
switchport access vlan vlan_id
DETAILED STEPS
PurposeCommand or Action
Selects the Gigabit Ethernet port to configure.
interface type number
Example:
Router(config)# Interface gigabitethernet0
Step 1
Places the port in trunk mode.switchport mode trunk
Example:
Router(config-if)# switchport mode trunk
Step 2
(Optional) Once the port is in trunk mode, it may be
assigned a VLAN number other than 1.
switchport access vlan vlan_id
Example:
Router(config-if)# switchport access vlan 2
Step 3
Cisco 800 Series Integrated Services Routers Software Configuration Guide
OL-31704-02 133
Configuring Ethernet Switches
Configuring VLANs
Page view 160
1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 443 444

Comments to this Manuals

No comments