
DescriptionSyntaxCommand
Sets the failover timer in minutes.
gsm failovertimer <1-7>
gsm failovertimer
Verifies the SIM CHV1 code.
gsm sim authenticate <0,7>
<pin> slot <0-1>
gsm sim authenticate
Specifies the maximum number of
failover retries. The default value
is 10.
gsm sim max-retry <0-65535>
gsm sim max-retry
Modifies the primary slot
assignment.
gsm sim primary slot <0-1>
gsm sim primary slot
Configures the SIM profile.
gsm sim profile <1-16> slot
<0-1>
gsm sim profile
Note the following:
•
For auto-switch and failover to work, configure the SIM profile for slots 0 and 1 using the gsm sim
profile command.
•
For auto-switch and failover to work, configure the chat script without a specific profile number.
•
If no SIM profile is configured, profile #1 is used by default.
•
If no GSM failover timer is configured, the default failover timeout is 2 minutes.
•
If no GSM SIM primary slot is configured, the default primary SIM is slot 0.
The following example shows you how to set the SIM switchover timeout period to 3 minutes:
router(config-controller)# gsm failovertimer 3
The following example shows you how to authenticate using an unencrypted pin:
router(config-controller)#
gsm
sim
authenticate
0
1234
slot
0
The following example shows you how to set the maximum number of SIM switchover retries to 20:
router(config-controller)#
gsm
sim
max-retry
20
The following example shows you how to set SIM slot 1 as the primary slot:
router(config-controller)# gsm sim primary slot 1
Cisco 800 Series Integrated Services Routers Software Configuration Guide
36 OL-31704-02
Basic Router Configuration
Configuring Dual SIM for Cellular Networks
Comments to this Manuals