Cisco NM-NAM= Datasheet download pdf (Page 22)

Network Analysis Module (NM-NAM)

How to Configure and Manage the Network Analysis Module (NM-NAM)

Cisco IOS Release: Multiple releases (see the Feature History Table)

Troubleshooting Tips

Make sure that the NAM console line is clear by entering the

service-module analysis-module slot/0 session clear command in privileged EXEC mode.

What to Do Next

Proceed to the “Configuring the NM-NAM” section.

Configuring the NM-NAM

This section describes how to configure the NM-NAM to establish network connectivity and configure

IP parameters. This task must be performed from the NAM CLI. For more advanced NAM configuration,

use the NAM Traffic Analyzer (web GUI) or refer to the Network Analysis Module Command Reference

for your NAM software release.

For information on assigning IP addresses, see the “NM-NAM Operating Topologies and IP Address

Assignments” section on page 6.

Prerequisites

Before performing this task, access the NAM console by performing Step 1 through Step 5 in the

“Opening and Closing a NAM Console Session from the Router” section on page 18.

SUMMARY STEPS

1. ip interface {internal | external}

2. ip address ip-address subnet-mask

3. ip broadcast broadcast-address

4. ip gateway ip-address

5. exsession on

exsession on ssh

6. ip domain name

7. ip host name

8. ip nameserver ip-address [ip-address][ip-address]

9. ping {host | ip-address}

10. show ip

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

No comments

Cisco NM-NAM= Datasheet Page 22