Network Analysis Module (NM-NAM)
Information About the Network Analysis Module (NM-NAM)
4
Cisco IOS Release: Multiple releases (see the Feature History Table)
Faceplate and LEDs
Figure 1 NM-NAM Faceplate and LEDs
NAM User Interfaces
The NAM has three user interfaces:
• Web GUI—The NAM Traffic Analyzer provides a browser-based GUI to configure and monitor the
NAM.
• CLI—A NAM-specific command-line interface is used to configure NAM. It can be accessed
through a NAM console session from the router or through Telnet or Secure Shell Protocol (SSH)
over the network.
• SNMP—The NAM supports SNMPv1 and SNMPv2c access to the RMON MIBs. Note that the
NAM Simple Network Management Protocol (SNMP) agent is separate from the SNMP agent in the
router; the agents use different IP addresses and have independent communities.
Nonoperating temperature –40° to 185°F (–40° to 85°C)
Humidity 5 to 95% noncondensing
Operating altitude 0 to 10,000 ft (0 to 3,000 m)
Table 1 NM-NAM Specifications (continued)
Specification Description
Figure 1
Callout LED Indicates
1 DISK There is activity on the hard drive.
2 LINK The Fast Ethernet connection is available to the network module.
3 ACT There is activity on the Fast Ethernet connection.
4 PWR Power is available to the network module.
5 EN The module has passed self-test and is available to the router.
NM-NAM
ENPWR
FastEthernet 0
DISK
LINK ACT
WARNING!!
Shut down NM-NAM application
before removing or power cycling.
CF
95749
2 3
4 5
1
Comments to this Manuals