Network Analysis Module (NM-NAM)
How to Configure and Manage the Network Analysis Module (NM-NAM)
30
Cisco IOS Release: Multiple releases (see the Feature History Table)
3. Enter a web username.
or
Press Return to enter the default web username “admin”.
4. Enter a password.
5. Enter the password again.
6. On your PC, open a web browser.
7. In the web browser, enter the NAM system IP address or hostname as the URL.
DETAILED STEPS
Command or Action Purpose
Step 1
Open a NAM console session from the router. See the
“Opening and Closing a NAM Console Session from
the Router” section on page 18.
or
Open a Telnet or SSH session to the NAM. See the
“Opening and Closing a Telnet or SSH Session to the
NAM” section on page 38.
Accesses the NAM CLI.
Step 2
ip http server enable
or
ip http secure server enable
Example:
root@localhost# ip http server enable
Example:
root@localhost# ip http secure server enable
Enables the HTTP server.
or
Enables the HTTP secure server (HTTPs).
Step 3
Enter a web username.
or
Press Return to enter the default web username
“admin”.
Example:
Please enter a web administrator user name
[admin]: joeadmin
Example:
Please enter a web administrator user name
[admin]: <cr>
Configures a web username.
• The NAM requires at least one web username and
password configuration.
• If NAM does not prompt you for a web username and
password, then at least one web username and password
combination was previously configured.
Step 4
Enter a password.
Example:
New password: <adminpswd>
Configures a password for the web username.
Comments to this Manuals