Cisco NM-NAM= Datasheet download pdf (Page 70)

Network Analysis Module (NM-NAM)

show interfaces analysis-module

Cisco IOS Release: Multiple releases (see the Feature History Table)

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 input packets with dribble condition detected

671863 packets output, 96101624 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

Table 5 describes the significant fields shown in the display.

Table 5 show interfaces analysis-module Field Descriptions

Field Description

Network-Analyzer Indicates whether the analysis module interface

hardware is currently active. The analysis module

interface is the router-side interface for the internal

Ethernet segment between the router and the NAM

network module.

If the analysis module interface hardware is

operational, the output states that the

“Network-Analyzer 1/0 is up.” If the interface has

been taken down by an administrator, the output

states that the “Network-Analyzer 1/0 is

administratively down.”

line protocol is Indicates whether the software processes that handle

the line protocol consider the line usable or whether

the line has been taken down by an administrator.

Hardware is...address is Hardware type and address.

MTU Maximum transmission unit (MTU) of the analysis

module interface.

BW Bandwidth of the interface, in kbps.

DLY Delay of the interface, in microseconds.

reliability Reliability of the interface as a fraction of 255

(255/255 is 100 percent reliability), calculated as an

exponential average over 5 minutes.

txload Transmit load on the interface as a fraction of 255

(255/255 is completely saturated), calculated as an

exponential average over 5 minutes.

rxload Receive load on the interface as a fraction of 255

(255/255 is completely saturated), calculated as an

exponential average over 5 minutes.

Encapsulation Encapsulation method assigned to the interface.

loopback Indicates whether or not loopback is set.

Keepalive Indicates whether or not keepalives are set and the

interval between keepalives if they have been set.

ARP type...ARP Timeout Type of Address Resolution Protocol (ARP)

assigned and length of timeout.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 76

Comments to this Manuals

No comments

Cisco NM-NAM= Datasheet Page 70

Comments to this Manuals

Related products and manuals for Networking cards Cisco NM-NAM=