Network Analysis Module (NM-NAM)
Configuration Examples for the Network Analysis Module (NM-NAM)
49
Cisco IOS Release: Multiple releases (see the Feature History Table)
!
interface analysis-module 2/0
ip address 209.165.200.225 255.255.255.224
hold-queue 60 out
no shutdown
!
NAM Configuration (NAM Software)
!
ip address 209.165.200.226 255.255.255.224
!
ip host "nam1"
!
ip domain "cisco.com"
!
ip gateway 209.165.200.225
!
ip broadcast 10.255.255.255
!
ip nameserver 172.16.201.29
!
ip interface internal
!
ip http server enable
!
exsession on
!
NAM Management Interface Is Internal and Analysis-Module Interface Is IP
Unnumbered: Example
In this configuration example:
• The internal NAM interface is used for management traffic.
• IP addresses from the same routable subnet are assigned to the Analysis-Module interface and the
NAM system.
• To conserve IP address space, the Analysis-Module interface is configured as IP unnumbered to
borrow the IP address of the Fast Ethernet interface.
• A static route to the NAM through the Analysis-Module interface is configured.
• The internal NAM interface is used to monitor WAN traffic on interface Serial 0/0, and the external
NAM interface is used to monitor LAN traffic on interface Fast Ethernet 0/0.
• The NM-NAM is installed in router slot 2.
Figure 8 shows the topology used in the example, and the following sections show the router and NAM
configurations:
• Router Configuration (Cisco IOS Software), page 50
• NAM Configuration (NAM Software), page 51
Comments to this Manuals