Network Analysis Module (NM-NAM)
Configuration Examples for the Network Analysis Module (NM-NAM)
51
Cisco IOS Release: Multiple releases (see the Feature History Table)
!
interface analysis-module 2/0
ip unnumbered FastEthernet0/0
no shutdown
hold-queue 60 out
!
NAM Configuration (NAM Software)
!
ip address 209.165.200.226 255.255.255.224
!
ip host "nam1"
!
ip domain "cisco.com"
!
ip gateway 209.165.200.225
!
ip broadcast 10.255.255.255
!
ip nameserver 172.16.201.29
!
ip interface internal
!
ip http server enable
!
exsession on
!
NAM Management Interface Is External and Analysis-Module Interface Is IP
Unnumbered: Example
In this configuration example:
• The external NAM interface is used for management traffic.
• The Analysis-Module interface is configured as IP unnumbered to borrow the IP address of the
loopback interface.
• The borrowed loopback interface IP address is not routable.
• The NAM system is configured with an IP address from the LAN subnet that is connected to the
external NAM interface.
• The internal NAM interface is used to monitor WAN traffic on interface Serial 0/0, and the external
NAM interface is used to monitor LAN traffic on interface Fast Ethernet 0/0.
• The NM-NAM is installed in router slot 3.
Figure 9 shows the topology used in the example, and the following sections show the router and NAM
configurations:
• Router Configuration (Cisco IOS Software), page 52
• NAM Configuration (NAM software), page 53
Comments to this Manuals