Cisco InfiniBand 4x User's Guide Page 169

  • Download
  • Add to my manuals
  • Print
  • Page
    / 174
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 168
Chapter 7. Configuring the Cisco 3012 InfiniBand to Ethernet gateway 155
Example 7-19 is the CLI of the 4948 after changes to support this bridge group.
Example 7-19 4948 - after support for redundancy added
4848-1#show run
...
!
interface GigabitEthernet1/16
description Connection to 3012 Ethernet Switch Module port 4/1 and 8/1
switchport access vlan 88
switchport mode access
spanning-tree portfast
!
interface GigabitEthernet1/17
description Connection to 3012 Ethernet Switch Module port 4/1 and 8/1
switchport access vlan 88
switchport mode access
spanning-tree portfast
...
interface Vlan88
ip address 172.16.225.250 255.255.255.0
no ip route-cache
...
7.7 Useful CLI commands
This section includes some useful CLI commands for supporting this environment.
7.7.1 For the 3012
Table 7-2 shows some useful commands for supporting the 3012 and the Ethernet gateway
module.
Table 7-2 3012 commands
Command Description
show config Shows the current running configuration of the 3012
show bridge-group Shows the configuration and status of any currently configured
bridge groups
show trunk Shows the configuration and status of any currently configured
trunk groups
show redundancy-group Shows the configuration and status of any currently configured
redundancy groups
Page view 168

Comments to this Manuals

No comments