Network Analysis Module (NM-NAM)
How to Configure and Manage the Network Analysis Module (NM-NAM)
20
Cisco IOS Release: Multiple releases (see the Feature History Table)
Examples
This section provides the following examples:
• Opening and Closing a NAM Console Session When AAA Authentication Is Not Configured or Is
Disabled on the NAM Console Line: Example, page 21
• Opening and Closing a NAM Console Session When AAA Authentication Is Configured and
Enabled on the NAM Console Line: Example, page 21
Step 5
At the password prompt, enter your password.
or
If you have not changed the password from the
factory-set default, enter root as the root password.
Example:
Password: <root>
—
Step 6
Perform the tasks that you need to perform in the NAM
CLI. When you want to end the NAM console session
and return to the Cisco IOS CLI, complete Step 7
through Step 10.
For initial configuration tasks, see the “Configuring the
NM-NAM” section on page 22.
For help using NAM CLI commands, see the “NAM CLI
Context-Sensitive Help” section on page 12.
Step 7
exit
Example:
root@localhost(sub-custom-filter-capture)# exit
root@localhost# exit
login:
Logs out of the NAM system or leaves a subcommand
mode.
• If you are in a subcommand mode, continue to enter the
exit command until you see the NAM login prompt.
Step 8
Hold Ctrl-Shift and press 6. Release all keys, and then
press x.
Example:
login: <suspend keystroke>
Router#
Suspends and closes the Telnet session.
Step 9
disconnect
Example:
Router# disconnect
Disconnects a line.
Step 10
Press Enter.
Example:
Closing connection to 10.20.30.40 [confirm]
<Enter>
Confirms that you want to disconnect the line.
Command or Action Purpose
Comments to this Manuals