Cisco 4G-LTE-ANTM-O-3 Installation Guide Page 431

  • Download
  • Add to my manuals
  • Print
  • Page
    / 444
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 430
TFTP Download Command Variables
This section describes the system variables that can be set in ROM monitor mode and that are used during
the TFTP download process. There are both required variables and optional variables.
The commands described in this section are case sensitive and must be entered exactly as shown.Note
Required Variables
These variables must be set with these commands before you use the tftpdnld command:
CommandVariable
IP_ADDRESS= ip_addressIP address of the router.
IP_SUBNET_MASK= ip_addressSubnet mask of the router.
DEFAULT_GATEWAY= ip_addressIP address of the default gateway of the router.
TFTP_SERVER= ip_addressIP address of the TFTP server from which the
software will be downloaded.
TFTP_FILE= filenameName of the file that will be downloaded to the router.
Optional Variables
These variables can be set with these commands before using the tftpdnld command:
CommandVariable
TFTP_VERBOSE= setting
Configures how the router displays file download
progress.
0No progress is displayed.
1Exclamation points (!!!) are displayed to indicate
file download progress. This is the default setting.
2Detailed progress is displayed during the file
download process; for example:
Initializing interface.
Interface link state up.
ARPing for 1.4.0.1
ARP reply for 1.4.0.1 received. MAC address
00:00:0c:07:ac:01
Cisco 800 Series Integrated Services Routers Software Configuration Guide
OL-31704-02 403
ROM Monitor
TFTP Download Command Variables
Page view 430
1 2 ... 426 427 428 429 430 431 432 433 434 435 436 ... 443 444

Comments to this Manuals

No comments