Cisco 15216 EDFA2 Specifications download pdf (Page 191)

9-43

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

9.7.29 RTRV-COND-DWDM

Command RTRV-COND-DWDM

Generates a report on the condition (state) of DWDM alarms.

Note The messages for Loss of Signal (LOS), Gain Out of Range (GAIN), and Loss of Output Power

(LPOUT) are prioritized (in the order just listed) so that only one message can be delivered at one time.

For example, if the ONS 15216 EDFA2 detects both a loss of input signal and a loss of output power at

the same time, it will deliver only the Loss of Signal (LOS) message to the user. This prioritized filtering

of alarms does not occur with the SNMP delivery of alarms of the ONS 15216 EDFA2.

Syntax

RTRV-COND-DWDM:[<tid>]:<aid>:<ctag>::[<condtype>][,,,];

M <ctag> COMPLD

"<aid>,<ccm>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,,<conddescr>"

;

Example 9-31 RTRV-COND-DWDM Command and Response

Amp01:ONS15216 EDFA2> RTRV-COND-DWDM:Amp01:ALL:229::LOS;

Amp01 2002-06-20 14:30:00

M 229 COMPLD

"1,DWDM:MJ,LOS,SA,6-20,14-25-30,,,\"Loss Of Signal\""

;

Table 9-36 RTRV-COND-DWDM Syntax Description

Parameter Syntax Description

aid 1 and ALL have same input effect.

1 Directly affecting the optical signal.

ALL Any or all of the preceding (command input only).

conddescr Detailed text description of the event. The conddescr is 1 to 64

characters of ASCII text. See condtype below.

condtype Condition type identifies the type of alarm (maps to

cerent15216EdfaLogEventID). Possible condtype and

corresponding conddescr (in quotes) are:

LOS “Loss of Signal” (input power) alarm

(cerent15216EdfaAlarmLpin).

GAIN “Gain Out of Range” alarm (cerent15216EdfaAlarmGain).

LPOUT “Loss of Output Power” alarm (cerent15216EdfaAlarmLpout).

date yyyy-mm-dd Date of origination of TL1 message.

1 ... 190 191 192 ... 280

No comments

Cisco 15216 EDFA2 Specifications Page 191