Cisco InfiniBand 4x User's Guide Page 112
- Page / 174
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
98 Implementing Cisco InfiniBand on IBM BladeCenter
Look for the .Boot extension in the description as shown in Figure 6-2 to confirm that Boot
over InfiniBand is enabled.
Figure 6-2 Verify Boot over InfiniBand Firmware installed on the HCA
Verify that the firmware is installed by booting the blade into the InfiniBand firmware menu
as shown in Figure 6-3.
Figure 6-3 Record the GUID from the InfiniBand Firmware menu
6.2.3 Configuring the SRP host on the SFS 3012 FC gateway
This section illustrates the procedure to configure an SRP host from the SFS3012 FC
gateway device. The SRP host configuration enables it to login to the fabric and zoned with
the corresponding target devices.
1. Initialize the InfiniBand port of the blade by booting the blade into the InfiniBand firmware
menu and pressing the x key when the following prompt is displayed during the boot
process (see Figure 6-3):
Type ‘x’ to configure boot options
The GUID of the host shows in the host display. Record the GUID. Keep the InfiniBand
firmware menu active to configure SRP host in the following steps. When the SRP host is
configured, port masking is completed and Boot LUN is mapped return to this menu and
refresh the screen.
[root@localhost sbin]# ./tvflash -i
HCA #0: MT25208 Tavor Compat, BC2 HSDC, revision A0
Primary image is v4.7.600 build 3.2.0.106, with label 'HCA.HSDC.A0.Boot'
Secondary image is v4.7.600 build 3.2.0.106, with label 'HCA.HSDC.A0.Boot'
Vital Product Data
Product Name: BC2 HSDC
P/N: 68-2738-01
E/C: Rev: 003
S/N: CAM101100A0
Freq/Power: PW=15W;PCIe 8x
Date Code: 1011
Checksum: Ok
Broadcom NetXtreme II Ethernet Boot Agent v2.8.5
Copyrith (C) 2000-2006 Broadcom Corporation
All rights reserved.
InfiniBand boot driver v3.2.0 build 106
(c)Copyright Topspin Communicatinos, Inc. 2003-2005
Type ’x’ to configure boot options
Node GUID: 0005ad0000050724
Waiting for SM to configure ports...........................................
x.....................................
--->[ 0] PXE Boot
Port LID IOC Service Name
[ 1] * - - 0000000000000000 [saved service]
[ 2] * * * 20000005ad00ffff [Well known boot service]
ERROR: Bade service name format
[e(x)it, (o)ptions, (s)ave, (r)estore, re(f)resh, (d)efault, d(i)sable]
Select[0]: _
- Redpaper 1
- October 2007 3
- Contract with IBM Corp 4
- Contents 5
- Contents v 7
- Trademarks 10
- Become a published author 13
- Comments welcome 13
- IBM BladeCenter products and 15
- 1.1 BladeCenter chassis 16
- 1.2 Blade servers 19
- 4X InfiniBand networking only 27
- InfiniBand products for 29
- BladeCenter 29
- OK (Green) and Fault (Yellow) 38
- 2.6.2 InfiniBand DDR HCAs 39
- InfiniBand technology 45
- 3.1.1 Upper layer protocols 46
- 3.1.2 Transport layer 46
- 3.1.3 Network layer 47
- 3.1.4 Data link layer 47
- 3.1.5 Physical layer 48
- 12X Link 49
- 3.2.3 Storage RDMA Protocol 50
- 3.3 Hardware 52
- 3.4 Management 52
- 3.5 Common markets 53
- 3.5.1 Application clustering 54
- 3.5.3 Storage area networks 54
- Configuring InfiniBand with 55
- QLogic bridges 55
- 4.1.1 Installing the drivers 56
- 4.1.5 Hints and tips 74
- Figure 4-66 Active SRP Map 89
- Figure 4-67 Add Direct Map 90
- Figure 4-70 93
- 5.2.3 Configuring IPoIB 105
- Cisco 3012 InfiniBand to FC 109
- 6.2 Blade booting from a SAN 110
- Installing hardware 111
- Figure 6-6 Define SRP host 114
- 6.2.5 Configuring storage 118
- 6.2.6 Discovering storage 119
- 6.2.8 Port masking 120
- Loading SCSI driver 128
- Loading ts_srp_host driver 128
- Configuring the Cisco 3012 131
- 7.2 Client information 136
- 7.3.1 The design 137
- EGW = Ethernet Gateway Module 147
- BG1 = Bridge Group 1 147
- Blue = InfiniBand 147
- Green = Ethernet 147
- Int Po5 153
- Figure 7-25 164
- 7.7 Useful CLI commands 169
- 7.7.2 For the 4948 170
- Abbreviations and acronyms 171
- Related publications 173
- Online resources 174
- Help from IBM 174
Related products and manuals for Network switches Cisco InfiniBand 4x
Network switches Cisco MFEBX1 User Manual
(11 pages)
(11 pages)
Network switches Cisco TrustSec User Manual
(10 pages)
(10 pages)
Network switches Cisco MGBLX1 User Manual
(13 pages)
(13 pages)
© 2020, manymanuals.com. All rights reserved. | 2.146 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals