Cisco InfiniBand 4x User's Guide download pdf (Page 77)

Chapter 4. Configuring InfiniBand with QLogic bridges 63

7. Click Next to continue the driver installation. The Wizard finds and installs InfiniHost

Mellanox InfiniBand HCA for PCI Express. When the driver instillation is complete, you

should see an entry for the HCA in device manager under InfiniBand Host Channel

Adapters as shown in Figure 4-43.

Figure 4-43 InfiniBand HCA in Windows Device Manager

4.2.2 QLogic InfiniBand Ethernet Bridge Module: Configuring VNIC

In this section we describe how to configure a virtual network interface (VNIC) on a Windows

blade server using the QLogic InfiniServ drivers and the QLogic InfiniBand Ethernet Bridge.

The VNIC driver allows you to create six virtual interfaces (one per port) per bridge module.

1. Windows finds the Open IPoIB Adapter.

We cover IPoIB in 4.2.3, “QLogic InfiniServ Driver: Configuring IPoIB” on page 65. If you

would like to install the IPoIB drivers now, you can skip ahead to that section and return to

the next step 2 when you are done. To skip IPoIB and to continue installing the VNIC

drivers, click Cancel now to exit and continue to step 2.

2. Windows finds the QLogic InfiniBand Ethernet Bridge Module. Select Install from a

specific location and click Next.

3. Click Browse under Include this location in the search. Select the following location

and then click OK.

C:\Program Files\SilverStorm\SilverStorm HCA\net

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 173 174

No comments

Cisco InfiniBand 4x User's Guide Page 77