Cisco 4G-LTE-ANTM-O-3 Installation Guide Page 85

  • Download
  • Add to my manuals
  • Print
  • Page
    / 444
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 84
Configuring Ethernet CFM (Port MEP)
Complete these steps to configure and enable Ethernet CFM on a port Maintenance End Point (MEP):
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ethernet cfm ieee
4.
ethernet cfm global
5.
ethernet cfm domain domain-name level value
6.
service service-name port
7.
continuity-check interval value
8.
end
9.
configure terminal
10.
interface gigabitethernet slot/port
11.
ethernet cfm mep domain domain-name mpid mpid-value service service-name
12.
end
DETAILED STEPS
PurposeCommand or Action
Enables the privileged EXEC mode.enable
Step 1
Example:
Router>enable
Enter your password when prompted.
Enters the global configuration mode.configure terminal
Example:
Router#configure terminal
Step 2
Enables the IEEE version of CFM.ethernet cfm ieee
Example:
Router(config)#ethernet cfm ieee
Step 3
Enables CFM processing globally on the router.ethernet cfm global
Example:
Router(config)#ethernet cfm global
Step 4
Cisco 800 Series Integrated Services Routers Software Configuration Guide
OL-31704-02 57
Configuring Ethernet CFM and Y.1731 Performance Monitoring on Layer 3 Interfaces
Configuring Ethernet CFM (Port MEP)
Page view 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 443 444

Comments to this Manuals

No comments