Cisco ASA5500-HW - Hardware Accessory Kit Network Device Installation Guide download pdf (Page 24)

1-2

Cisco ASA 5500 Series Hardware Installation Guide

OL-10089-01

Chapter 1 Preparing for Installation

Installation Overview

To prepare for the installation of the chassis, perform the following steps:

Step 1 Review the safety precautions outlined in the Regulatory Compliance and Safety Information for the

Cisco ASA 5500 Series document.

Step 2 Read the release notes for the respective software version.

Step 3 Unpack the chassis. An accessory kit ships with the chassis and includes the following items:

documentation, a product CD, a power cord (AC models only), two RJ-45 Ethernet cables, one RJ-45 to

DB-9 console cable, a rack-mounting kit, and four self-adhesive feet (for desktop mounting).

Step 4 Place the chassis on a stable work surface.

Safety Recommendations

Use the following guidelines and the information in the following sections to help ensure your safety and

protect the adaptive security appliance. The list of guidelines may not address all potentially hazardous

situations in your working environment, so be alert and exercise good judgement at all times.

Note If you need to remove the chassis cover to install a hardware component, such as additional memory or

an interface card, doing so does not affect your Cisco warranty. Upgrading the adaptive security

appliance does not require any special tools and does not create any radio frequency leaks.

The safety guidelines are as follows:

• Keep the chassis area clear and dust-free before, during and after installation.

• Keep tools away from walk areas where you and others could fall over them.

• Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains, that could get caught

in the chassis.

• Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.

• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

• Never attempt to lift an object that is too heavy for one person to handle.

This section includes the following topics:

• Maintaining Safety with Electricity, page 1-3

• Preventing Electrostatic Discharge Damage, page 1-4

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 81 82

No comments

Cisco ASA5500-HW - Hardware Accessory Kit Network Device Installation Guide Page 24