Cisco ASA5500-HW - Hardware Accessory Kit Network Device Installation Guide download pdf (Page 52)

A-2

Cisco ASA 5500 Series Hardware Installation Guide

78-17374-01

Appendix A Installing and Replacing the SSM

Installing and Replacing the 4GE SSM

Overview

Figure A-1 lists the 4GE SSM ports and LEDs.

Figure A-1 4GE SSM Ports and LEDs

Note Figure A-1 shows SFP modules installed in the ports slots. You must order and install the SFP modules

if you want to use this feature. For more information on SFP ports and modules, see the “Installing and

Removing the SFP Modules” section on page A-4.

Table A-1 describes the 4GE SSM LEDs.

1 RJ-45 ports 5 Status LED

2 RJ-45 Link LED 6 SFP ports

3 RJ-45 Speed LED 7 SFP Link LED

4 Power LED 8 SFP Speed LED

132983

LNK

SPD0123

Cisco SSM-4GE

Table A-1 4GE SSM LEDs

LED Color State Description

2, 7 LINK Green Solid

Flashing

There is an Ethernet link.

There is Ethernet activity.

3, 8 SPEED Off

Green

Amber

10 MB

100 MB

1000 MB (GigE)

There is no network activity.

There is network activity at 100 Mbps.

There is network activity at 1000 Mbps.

4 POWER Green On The system has power.

5 STATUS Green

Green

Amber

Flashing

Solid

The system is booting.

The system booted correctly.

The system diagnostics failed.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 81 82

Comments to this Manuals

No comments

Cisco ASA5500-HW - Hardware Accessory Kit Network Device Installation Guide Page 52

Comments to this Manuals

Related products and manuals for Chassis components Cisco ASA5500-HW - Hardware Accessory Kit Network Device