Cisco ASA5500-HW - Hardware Accessory Kit Network Device Installation Guide download pdf (Page 63)

B-1

Cisco ASA 5500 Series Hardware Installation Guide

OL-10089-01

APPENDIX

Maintenance and Upgrade Procedures

This appendix describes how to install and replace the chassis cover, the power supply, and the

CompactFlash. This appendix includes the following topics:

• Removing and Replacing the Chassis Cover, page B-1

• Working in an ESD Environment, page B-4

• Removing and Replacing the Power Supply, page B-4

• Installing the DC Model, page B-8

• Removing and Replacing the CompactFlash, page B-10

Removing and Replacing the Chassis Cover

This section describes how to remove and replace the chassis cover from the adaptive security appliance.

This section includes the following topics:

• Removing the Chassis Cover, page B-1

• Replacing the Chassis Cover, page B-3

Removing the Chassis Cover

To remove the chassis cover, perform the following steps:

Note Removing the chassis cover does not affect Cisco warranty. Upgrading the adaptive security appliance

does not require any special tools and does not create any radio frequency leaks.

Step 1 Read the Regulatory Compliance and Safety Information for the Cisco ASA 5500 Series document.

Step 2 Power off the adaptive security appliance. Once the upgrade is complete, you can safely power on the

chassis.

Warning

Before working on a system that has an On/Off switch, turn OFF the power and unplug the power cord.

Statement 1

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 81 82

No comments

Cisco ASA5500-HW - Hardware Accessory Kit Network Device Installation Guide Page 63