Cisco ASA5500-HW - Hardware Accessory Kit Network Device Installation Guide download pdf (Page 37)

3-3

Cisco ASA 5500 Series Hardware Installation Guide

78-17374-01

Chapter 3 ASA 5510, ASA 5520, ASA 5540, and ASA 5550

Product Overview

For more information about the Management port, see the management only command in the

Cisco Security Appliance Command Reference.

The ASA 5550 has a fixed configuration with an embedded 4GE slot as shown in Figure 3-3.

Figure 3-3 Rear Panel LEDs and Ports for the ASA 5550

1 RJ-45 ports

1. GigabitEthernet ports, from right to left, GigabitEthernet 0/0, GigabitEthernet 1/0, GigabitEthernet 1/2, and

GigabitEthernet 1/3

9 USB 2.0 interfaces

2. Not supported at this time.

17 AUX port

2 RJ-45 Link LED 10 Management port

3. The management 0/0 interface is a Fast Ethernet interface designed for management traffic only.

18 External CompactFlash slot

3 RJ-45 Speed LED 11 Network interfaces

4. GigabitEthernet interfaces, from right to left, GigabitEthernet 0/0, GigabitEthernet 0/1, GigabitEthernet 0/2, and

GigabitEthernet 0/3.

19 Serial Console port

4 Power LED 12 Power indicator LED 20 Power switch

5 Status LED 13 Status indicator LED 21 Power indicator LED

6 SFP ports

5. SFP ports, from right to left, GigabitEthernet 0/0, GigabitEthernet 1/0, GigabitEthernet 1/2, and GigabitEthernet 1/3

14 Active LED 22 Power connector

7 SFP Link LED 15 VPN LED

8 SFP Speed LED 16 Flash LED

153642

LINK SPD

MGMT

USB2

USB1

FLASH

CONSOLE

AUX

POWER

STATUS

FLASH

12 14 16

VPN

ACTIVE

LNK

SPD0123

2 3

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 81 82

Comments to this Manuals

No comments

Cisco ASA5500-HW - Hardware Accessory Kit Network Device Installation Guide Page 37

Comments to this Manuals

Related products and manuals for Chassis components Cisco ASA5500-HW - Hardware Accessory Kit Network Device