6-146
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Chapter6 Configuring Hardware
How Do I Configure VISM-PR Cards?
6.9.4.2 Configuring the ATM Network for VISM-PR
To configure the ATM network for VISM-PR cards by adding and configuring connections, please see
Chapter 7, “Provisioning Connections.”
6.9.4.3 Configuring the Call Agent Interface for VISM-PR
Figure 6-72 Process for Configuring the Call Agent Interface for VISM-PR
To configure the call agent interface, complete the following steps:
Step 1 Specify the domain name, IP address, and subnet mask—See 6.9.4.3.1 Specifying the Domain Name,
IP Address and Subnet Mask for VISM-PR, page 6-147.
Step 2 Set up call agents and protocols—See 6.9.4.3.2 Setting Up Call Agents and Protocols for VISM-PR,
page 6-149.
Step 3 Configure the gateway control protocol port—See 6.9.4.3.3 Configuring the Gateway Control Protocol
Port for VISM-PR, page 6-158.
Step 4 Configure ISDN PRI backhaul—See 6.9.4.3.4 Configuring ISDN PRI Backhaul for VISM-PR, page
6-167.
130002
Set up call agents and
rotocols
Configure the gateway
control
rotocol
ort
Specify the
domain name,
IP address, and
subnet mask
Configure ISDN
PRI backhaul
Comments to this Manuals