Cisco ONS 15454 SDH Specifications Page 107

  • Download
  • Add to my manuals
  • Print
  • Page
    / 262
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 106
2-27
Cisco ONS 15454 SDH Troubleshooting and Maintenance Guide, R3.3
May 2002
Chapter 2 General Troubleshooting
Circuits and Timing
Procedure: Change VLAN Port Tag and Untagged Settings
Step 1 Display the CTC card view for the Ethernet card involved in the problem VLAN.
Step 2 Click the Provisioning > VLAN tabs (Figure 2-13).
Figure 2-13 Configuring VLAN membership for individual Ethernet ports
Step 3 If the port is set to Tagged, continue to look at other cards and their ports in the VLAN until you find
the port that is set to Untag.
Step 4 At the VLAN port set to Untag, click the port and choose Tagged.
Note The attached external devices must recognize IEEE 802.1Q VLANs.
Step 5 After each port is in the appropriate VLAN, click Apply.
2.4 Circuits and Timing
This section provides solutions to circuit creation and reporting errors, as well as common timing
reference errors and alarms.
Page view 106
1 ... 106 107 108 ... 262

Comments to this Manuals

No comments