Cisco ONS 15454 SDH Specifications Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 262
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
3-12
Cisco ONS 15454 SDH Troubleshooting and Maintenance Guide, R3.3
May 2002
Chapter 3 Card Reference
Cross Connect XC10G Card
Interface: 10 Base-T LAN (via back plane)
Access: on the MIC-A/P unit
Synchronization
Stratum 3 E, per ITU-T G.813
Free running access: accuracy + 4.6 ppm
Holdover Stability: 3.7 * 10
-7
per day including temperature (< 255 slips in first 24 hours)
Reference: External BITS, line, internal
Environmental
Operating Temperature: -5 to +45 degrees Celsius
Operating Humidity: 5 to 95%, non-condensing
Power Consumption: 9.82 W, 0.20 A (AMPS) at -48V, 33.5 BTU/hr
Dimensions
Height: 321.3 mm (12.650 in.)
Width: 18.2 mm (0.716 in.)
Depth: 228.6 mm (9.000 in.)
Depth with backplane connector: 235 mm (9.250 in.)
Weight not including clam shell: 0.7 kg (1.5 lb)
Compliance
ONS15454 SDH cards, when installed in a system, comply with these standards:
Safety: IEC 60950, EN 60950, UL 60950, CSA C22.2 No. 60950, TS 001, AS/NZS 3260
3.7 Cross Connect XC10G Card
The XC10G card cross-connects STM-1, STM-4, STM-16, and STM-64 signal rates. The XC10G
provides a maximum of 384 x 384 VC-4 non-blocking cross connections. Any STM-1 on any port can
be connected to any other port, meaning that the STM cross connections are non blocking.
The XC10G faceplate, cross-connections, and functions are shown in Figure 3-6, Figure 3-7, and
Figure 3-8.
Note The lowest level cross-connect is STM-1. Lower level signals, such as E-1, DS-3, or E-3, can be
dropped. This may leave part of the bandwidth unused.
Page view 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 261 262

Comments to this Manuals

No comments