3-3
Cisco ONS 15454 SDH Troubleshooting and Maintenance Guide, R3.3
May 2002
Chapter 3 Card Reference
Overview
3.1.4 Ethernet Cards
Table 3-3 shows available Ethernet cards for the ONS 15454 SDH. The Ethernet cards reduce the need
for certain external Ethernet aggregation equipment such as hubs or switches.
3.1.5 Card Power Consumption
Table 3-4 shows power consumption per card.
OC48 ELR/STM16 EH 100 GHz The OC48 ELR/STM16 EH 100 GHz card provides one long-range
(enhanced) STM-16 port and operates in any high speed card slot.
This card is available in 18 different wavelengths (9 in the Blue
Band, 9 in the Red Band) in the 1550 nm range, every second
wavelength in the ITU grid for 100 GHz spacing DWDM.
OC192 LR/STM64 LH 1550 The OC192 LR/STM64 LH 1550 card provides one long-range
STM-64 port at 1550 nm and operates in any high speed slot.
Table 3-2 Optical Cards for the ONS 15454 SDH (continued)
Card Port
Table 3-3 Ethernet Cards for the ONS 15454 SDH
Card Port
E100T-G The E100T-G card provides twelve switched, auto-sensing, 10/100
Base-T Ethernet ports.
E1000-2-G The E1000-2-G card provides two ports of IEEE-compliant, 1000
MBits/s (Mbps) ports. GBICs are separate.
G1000-4 The G1000-4 card provides four ports of IEEE-compliant, 1000
MBits/s (Mbps) ports. GBICs are separate.
Table 3-4 Card Power Consumption for the ONS 15454 SDH
Card Watts
Amperage
at -48V
Amperage
at -40.5V BTU/hr
TCC-I 21.00 0.44 0.52 71.7
XC10G 78.60 1.64 1.94 268.4
E1N-14 24.00 0.50 0.59 81.9
E3-12 44.00 0.92 1.09 150.2
DS3i-N-12 30.00 0.63 0.74 102.4
FMEC-E1 0.00 0.00 0.00 0.0
FMEC-E3/DS3 0.00 0.00 0.00 0.0
FMEC-DS1/E1 0.00 0.00 0.00 0.0
MIC-A/P (0.13) via TCC-I
MIC-C/T/P (0.38) via TCC-I
Comments to this Manuals