3-42
Cisco ONS 15454 SDH Troubleshooting and Maintenance Guide, R3.3
May 2002
Chapter 3 Card Reference
OC3 IR 4/STM1 SH 1310 Card
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments.
3.18.2 OC3 IR 4/STM1 SH 1310 Card Specifications
• Line
–
Bit Rate:155.52 MBits/s (Mbps)
–
Code: Scrambled NRZ
–
Fiber: 1310 nm single-mode
–
Loopback Modes: Terminal and Facility
–
Connector: SC
–
Compliance: ITU-T G.707, ITU-T G.957
• Transmitter
–
Maximum Transmitter Output Power: -8 dBm
–
Minimum Transmitter Output Power: -15 dBm
–
Center Wavelength: 1293 nm – 1334 nm
–
Nominal Wavelength: 1310 nm
–
Transmitter: Fabry Perot laser
• Receiver
–
Maximum Receiver Level: -8 dBm at BER 1 * 10
-10
–
Minimum Receiver Level: -28 dBm at BER 1 * 10
-10
–
Receiver: InGaAs/InP photo detector
–
Link Loss Budget: 13 dB
• Environmental
–
Operating Temperature: -5 to +45 degrees Celsius
–
Operating Humidity: 5 to 95%, non-condensing
–
Power Consumption: 19.20 W, 0.40 A (AMPS) at -48V, 65.6 BTU/hr
• Dimensions
–
Height: 321.3 mm (12.650 in.)
–
Width: 18.2 mm (0.716 in.)
–
Depth: 228.6 mm (9.000 in.)
–
Depth with backplane connector: 235 mm (9.250 in.)
–
Weight not including clam shell: 0.4 kg (1.0 lb)
• Compliance
ONS15454 SDH optical cards, when installed in a system, comply with these standards:
–
Safety: IEC 60950, EN 60950, UL 60950, CSA C22.2 No. 60950, TS 001, AS/NZS 3260, IEC
60825-1, IEC 60825-2, 21 CFR 1040-10 and 21 CFR 1040.11.
Comments to this Manuals