5-31
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 5 Configuring Virtual Servers
Configuring Virtual Servers
Table 5-8 Layer 7 Load-Balancing Match Criteria Configuration
Selection Action
Existing class map
1. Click View to review the match condition information for the selected class map.
2. Do the following:
–
Click Cancel to continue without making changes and to return to the previous screen.
–
Click Edit to modify the existing configuration.
–
Click Duplicate to create a new class map with the same attributes without affecting other
virtual servers using the same class map.
See the “Shared Objects and Virtual Servers” section on page 5-9 for more information about
modifying shared objects.
*New*
1. In the Name field, enter a unique name for this class map.
2. In the Matches field, select the method to be used to evaluate multiple match statements when
multiple match conditions exist:
–
Any—Indicates that a match exists if at least one of the match conditions is satisfied.
–
All—Indicates that a match exists only if all match conditions are satisfied.
3. In the Conditions table, click Add to add a new set of conditions or select an existing entry,
and then click Edit to modify it.
4. In the Type field, select the match condition and configure any protocol-specific options:
–
For Generic protocol options, see Table 12-8.
–
For HTTP and HTTPS protocol options, see Table 5-9.
–
For RADIUS protocol options, see Table 12-9.
–
For RTSP protocol options, see Table 12-10.
–
For SIP protocol options, see Table 12-11.
5. Configure any condition-specific options using the information in Table 5-9.
6. Do the following:
–
Click OK to accept your entries and to return to the Conditions table.
–
Click Cancel to exit this procedure without saving your entries and to return to the
Conditions table.
*Inline Match* In the Conditions Type field, select the type of inline match condition and configure any
protocol-specific options:
• For Generic protocol options, see Table 12-8
• For HTTP and HTTPS protocol options, see Table 5-9
• For RADIUS protocol options, see Table 12-9
• For RTSP protocol options, see Table 12-10
• For SIP protocol options, see Table 12-11
Comments to this Manuals