6-50
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 6 Configuring Real Servers and Server Farms
Configuring Health Monitoring
FTP Probe Attributes
Note Click More Settings to access the additional attributes for the FTP probe type. By default, ACE
appliance Device Manager hides the probe attributes with default values and the probe attributes which
are not commonly used.
To configure probe expect statuses for FTP probes, see Configuring Health Monitoring Expect Status,
page 6-67.
HTTP Probe Attributes
Note Click More Settings to access the additional attributes for the HTTP probe type. By default, ACE
appliance Device Manager hides the probe attributes with default values and the probe attributes which
are not commonly used.
TCP Connection
Termination
Check box that when checked, configures the ACE to terminate TCP
connections gracefully by sending a FIN to the server. Uncheck the check
box to configure the ACE to terminate a TCP connection by sending an RST.
Open Timeout
(Seconds)
Enter the number of seconds to wait when opening a connection with a real
server. Valid entries are integers from 1 to 65535, and the default value is 1.
Table 6-16 FTP Probe Attributes
Field Action
More Settings
Port Enter the port number that the probe is to use. By default, the probe uses port
inheritance to determine the port number. For more information, see the
general attribute Port field description.
TCP Connection
Termination
Check box that when checked, configures the ACE to terminate TCP
connections gracefully by sending a FIN to the server. Uncheck the check
box to configure the ACE to terminate a TCP connection by sending an RST.
Open Timeout
(Seconds)
Enter the number of seconds to wait when opening a connection with a real
server. Valid entries are integers from 1 to 65535, and the default value is 1.
Table 6-15 Finger Probe Attributes (continued)
Field Action
Comments to this Manuals