9-17
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 9 Configuring SSL
Using SSL Keys
Step 4 Do the following:
• Click OK to export the certificate and to return to the Certificates table.
• Click Cancel to exit this procedure without exporting the certificate and to return to the Certificates
table.
Related Topics
• Configuring SSL, page 9-1
• Importing SSL Certificates, page 9-8
• Importing SSL Key Pairs, page 9-12
• Generating SSL Key Pairs, page 9-15
• Configuring SSL Chain Group Parameters, page 9-25
• Configuring SSL CSR Parameters, page 9-26
• Configuring SSL Proxy Service, page 9-28
Table 9-6 SSL Certificate Export Attributes
Field Description
Protocol Specify the method to be used for exporting the SSL certificate:
• FTP—Indicates that FTP is to be used to access the network server when
exporting the SSL certificate.
• SFTP—Indicates that SFTP is to be used to access the network server
when exporting the SSL certificate.
• TFTP—Indicates that TFTP is to be used to access the network server
when exporting the SSL certificate.
• TERMINAL—Indicates that you will export the certificate using cut
and paste by pasting the certificate and key pair information to the
terminal display. You can only use the terminal method to display PEM
files, which are in ASCII format.
IP Address This field appears for FTP, TFTP, and SFTP.
Enter the IPv4 address of the remote server to which the SSL certificate file
is to be exported.
Remote File Name This field appears for FTP, TFTP, and SFTP.
Enter the directory and filename to be used for the SSL certificate file on the
remote network server.
User Name This field appears for FTP and SFTP.
Enter the name of the user account on the remote network server.
Password This field appears for FTP and SFTP.
Enter the password for the user account on the remote network server.
Confirm This field appears for FTP and SFTP.
Reenter the password.
Comments to this Manuals