Cisco Explorer 4700 Installation Guide download pdf (Page 229)

100

101

6-27

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 6 Configuring Real Servers and Server Farms

Configuring Server Farms

State Select the state of this server:

• In Service—Indicates that this server is in service.

• In Service Standby—Indicates that this server is a backup server and is

to remain inactive unless the primary server fails. If the primary server

fails, the backup server becomes active and starts accepting

connections.

• Out Of Service—Indicates that this server is out of service.

Buddy Real Group

Name

Create a buddy real server group or select an existing one to enable

persistence to the same real server or group of real servers across multiple

server farms (for more information, see the “Buddy Sticky Groups” section

on page 7-6).

Fail-On-All This field appears only for real servers identified as host servers.

By default, real servers with multiple probes configured for them have an

OR logic associated with them. This means that if one of the real server

probes fails, the real server fails and enters the PROBE-FAILED state.

Click this check box to configure a real server to remain in the

OPERATIONAL state unless all probes associated with it fail (AND logic).

The Fail On All function is applicable to all probe types.

Min. Connections Enter the minimum number of connections that the number of connections

must fall below before the ACE appliance resumes sending connections to

the server after it has exceeded the number in the Max. Connections field.

The number in this field must be less than or equal to the number in the Max.

Connections field. 1 to 4000000. The default value is 4000000.

Max. Connections Enter the maximum number of active connections that can be sent to the

server. When the number of connections exceeds this number, the ACE

appliance stops sending connections to the server until the number of

connections falls below the number specified in the Min. Connections field.

Valid entries are integers from 1 to 4000000. The default is 4000000.

Weight Enter the weight to assign to the server. Valid entries are integers from 1 to

100, and the default is 8.

Cookie String This field appears only for real servers identified as hosts.

Enter a cookie string value of the real server, which is to be used for HTTP

cookie insertion when establishing a sticky connection. Valid entries are text

strings with a maximum of 32 alphanumeric characters. You can include

spaces and special characters in a cookie string value.

Use cookie insertion when you want to use a session cookie for persistence

if the server is not currently setting the appropriate cookie. With this feature

enabled, the ACE inserts the cookie in the Set-Cookie header of the response

from the server to the client. See Chapter 7, “Configuring Stickiness” for

details on HTTP cookie sticky connections.

Table 6-6 Real Server Configuration Attributes (continued)

Field Description

1 ... 228 229 230 ... 648

Comments to this Manuals

No comments

Cisco Explorer 4700 Installation Guide Page 229

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Cisco Explorer 4700