Cisco Explorer 4700 Installation Guide download pdf (Page 504)

100

101

12-84

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 12 Configuring Traffic Policies

Configuring Rules and Actions for Policy Maps

Setting Policy Map Rules and Actions for Layer 7 Skinny Deep Packet

Inspection

Use this procedure to configure the rules and actions for a Skinny Client Control Protocol (SCCP) deep

packet inspection policy map.

Assumptions

• A Skinny deep packet inspection policy map has been configured.

• A class map has been defined for a class map rule if you do not want to use the class-default class

map.

Procedure

Step 1 Choose Config > Virtual Contexts > context > Expert > Policy Maps. The Policy Maps table appears.

Step 2 In the Policy Maps table, select the Skinny deep packet inspection policy map you want to set rules and

actions for. The Rule table appears.

Step 3 In the Rule table, click Add to add a new rule, or select the rule you want to modify, and then click Edit.

The Rule screen appears.

Step 4 In the Type field, confirm that Match Condition is selected.

Step 5 In the Match Condition Name field, enter a name for this match condition. Valid entries are unquoted

text strings with no spaces and a maximum of 64 alphanumeric characters.

Step 6 In the Match Condition Type field, confirm that Message ID is selected.

Step 7 In the Message ID Operator field, indicate whether the match criteria is for a single message identifier

or for a range of message identifiers:

• Equal To—A single message identifier is used for this match condition.

In the Message ID Value field, enter the numerical identifier of a SCCP message. Valid entries are

integers from 0 to 65535.

• Range—A range of message identifiers is used for this match condition.

a. In the Message ID Low Range Value field, enter the lowest numerical identifier of a range of

SCCP messages. Valid entries are integers from 0 to 65535.

b. In the Message ID High Range Value field, enter the highest numerical identifier of a range of

SCCP messages. Valid entries are integers from 0 to 65535, and the value in this field must equal or

be greater than the value in the Message ID Low Range Value field.

Step 8 In the Insert Before field, indicate whether this rule is to precede another rule in this policy map:

• N/A—This option is not configured.

• False—This rule is not to precede another rule in this policy map.

• True—This rule is to precede another rule in this policy map.

Step 9 If you select True, the Insert Before Policy Rule field appears. Select the rule that you want the current

rule to precede.

1 ... 503 504 505 ... 648

Comments to this Manuals

No comments

Cisco Explorer 4700 Installation Guide Page 504

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Cisco Explorer 4700