8-19
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-01
Chapter 8 Configuring Parameter Maps
Configuring RTSP Parameter Maps
Configuring RTSP Parameter Maps
RTSP parameter maps allow you to configure advanced RTSP behavior for server load-balancing
connections.
Use this procedure to configure an RTSP parameter map.
Procedure
Step 1 Select Config > Virtual Contexts > context > Load Balancing > Parameter Maps > RTSP
Parameter Maps. The RTSP Parameter Maps table appears.
Step 2 Click Add to add a new parameter map, or select an existing parameter map, and then click Edit to
modify it. The RTSP Parameter Maps configuration screen appears.
Step 3 Configure the parameter map using the information in Table 8-8.
Step 4 Do the following:
• Click Deploy Now to deploy this configuration.
• Click Cancel to exit this procedure without saving your entries and to return to the RTSP Parameter
Maps table.
• Click Next to deploy your entries and to configure another RTSP parameter map.
Related Topics
• Configuring Parameter Maps, page 8-1
• Configuring Traffic Policies, page 12-1
• Configuring Virtual Contexts, page 4-1
Table 8-8 RTSP Parameter Map Attributes
Field Description
Parameter Name Enter a unique name for the parameter map. Valid entries are unquoted text strings with no
spaces and a maximum of 64 alphanumeric characters.
Description Brief description of the parameter map. Enter a text string with a maximum of
240 alphanumeric characters (A–Z, a–z, 0–9). Spaces and special characters are allowed.
Double quotes must be entered as matching pairs.
Case-Insensitive Check this check box to indicate that the ACE is to be case insensitive. Clear this check box
to indicate that the ACE is to be case sensitive.
Header Max. Parse Length
(Bytes)
Enter the number of bytes to parse for the total length of RTSP headers. Valid entries are
integers from 1 to 65535 with a default of 2048 bytes.
Comments to this Manuals