Cisco IPS 7.1 Installation Guide download pdf (Page 117)

100

101

4-17

Cisco Intrusion Prevention System Appliance Hardware Installation Guide for IPS 7.1

OL-24002-01

Chapter 4 Installing the IPS 4345 and IPS 4360

Removing and Installing the Power Supply

Figure 4-11 shows both the removable AC (on the left) and DC (on the right) power supplies for the

IPS 4360.

Figure 4-11 AC Power Supply and DC Power Supply

Table 4-4 describes the power supply indicator. The function of the indicator is the same for both the AC

and DC power supplies.

1 Power supply indicator 2 DC power supply positive connection

3 DC power supply neutral connection 4 DC power supply negative connection

11 2 3 4

333056

Table 4-4 AC and DC Power Supply Indicator

Indicator Color and State Description

Solid green Power output is on and within the normal operating range.

Blinking green, at the rate of one

blink per second

Input power that is within the normal operating range is being

supplied, but the Standby switch is in the Standby position (and

not in the On position).

Solid amber A power supply critical event has occurred, and the power

supply has shut down. The critical event can be temperature,

voltage, current, or fan operating outside the normal operating

range.

1 ... 116 117 118 ... 422

Comments to this Manuals

No comments

Cisco IPS 7.1 Installation Guide Page 117

Comments to this Manuals

Related products and manuals for Networking Cisco IPS 7.1