Cisco IPS 7.1 Installation Guide download pdf (Page 19)

1-3

Cisco Intrusion Prevention System Appliance Hardware Installation Guide for IPS 7.1

OL-24002-01

Chapter 1 Introducing the Sensor

How the Sensor Functions

• Generate IP session logs, session replay, and trigger packets display.

IP session logs are used to gather information about unauthorized use. IP log files are written when

events occur that you have configured the appliance to look for.

• Implement multiple packet drop actions to stop worms and viruses.

Your Network Topology

Before you deploy and configure your sensors, you should understand the following about your network:

• The size and complexity of your network.

• Connections between your network and other networks (and the Internet).

• The amount and type of network traffic on your network.

This knowledge will help you determine how many sensors are required, the hardware configuration for

each sensor (for example, the size and type of network interface cards), and how many managers are

needed.

Correctly Deploying the Sensor

You should always position the IPS sensor behind a perimeter-filtering device, such as a firewall or

adaptive security appliance. The perimeter device filters traffic to match your security policy thus

allowing acceptable traffic in to your network. Correct placement significantly reduces the number of

alerts, which increases the amount of actionable data you can use to investigate security violations. If

you position the IPS sensor on the edge of your network in front of a firewall, your sensor will produce

alerts on every single scan and attempted attack even if they have no significance to your network

implementation. You will receive hundreds, thousands, or even millions of alerts (in a large enterprise

environment) that are not really critical or actionable in your environment. Analyzing this type of data

is time consuming and costly.

Tuning the IPS

Tuning the IPS ensures that the alerts you see reflect true actionable information. Without tuning the IPS,

it is difficult to do security research or forensics on your network because you will have thousands of

benign events, also known as false positives. False positives are a by-product of all IPS devices, but they

occur much less frequently in Cisco IPS devices since Cisco IPS devices are stateful, normalized, and

use vulnerability signatures for attack evaluation. Cisco IPS devices also provide risk rating, which

identifies high risk events, and policy-based management, which lets you deploy rules to enforce IPS

signature actions based on risk rating.

Follow these tips when tuning your IPS sensors:

• Place your sensor on your network behind a perimeter-filtering device. Proper sensor placement can

reduce the number of alerts you need to examine by several thousands a day.

• Deploy the sensor with the default signatures in place.

The default signature set provides you with a very high security protection posture. The Cisco

signature team has spent many hours on testing the defaults to give your sensor the highest

protection. If you think that you have lost these defaults, you can restore them.

• Make sure that the event action override is set to drop packets with a risk rating greater than 90. This

is the default and ensures that high risk alerts are stopped immediately.

1 ... 18 19 20 ... 422

Comments to this Manuals

No comments

Cisco IPS 7.1 Installation Guide Page 19

Comments to this Manuals

Related products and manuals for Networking Cisco IPS 7.1