5-4
Cisco Intrusion Prevention System Appliance Hardware Installation Guide for IPS 7.1
OL-24002-01
Chapter 5 Installing the IPS 4510 and IPS 4520
Chassis Features
Figure 5-2 shows the front view of the IPS 4510 and IPS 4520.
Figure 5-2 IPS 4510 and IPS 4520 Front Panel Features
1 Removal screws 2 Reserved bays for hard disk drives
1
1. Hard disk drives are not supported at this time. The hard disk drive bays are empty.
3 TenGigabitEthernet 0/9
(1-Gb and 10-Gb fiber SFP/SFP+ modules)
4 TenGigabitEthernet 0/8
(1-Gb and 10-Gb fiber SFP/SFP+ modules)
5 TenGigabitEthernet 0/7
(1-Gb and 10-Gb fiber SFP/SFP+ modules)
6 TenGigabitEthernet 0/6
(1-Gb and 10-Gb fiber SFP/SFP+ modules)
7 GigabitEthernet 0/0 through 0/5
(from right to left, 1-Gb copper RJ45)
8 Management 0/1
2
(GigabitEthernet RJ45)
2. Reserved for future use.
9 Management 0/0
(GigabitEthernet RJ45)
10 USB port
11 USB port 12 Front panel indicators
13 Auxiliary port (RJ45) 14 Console port (RJ45)
15 Reset
3
3. Reserved for future use.
PWR
BOOT
ALARM
ACT
VPN
PS1
HDD1
PS0
HDD0
USB
RESET
0
7
6
1012345
MGMT
0
1
AUX CONSOLE
9
8
SFP/SFP+
Cisco ASA 5585-X IPS SSP
Cisco IPS 4520
21 3 4 7 8 9 10 11 12 13 14 15
331672
15 6
Comments to this Manuals