2-107
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
cpa-client destination
cpa-client destination
Configures the destination CPA server.
cpa-client destination ip-address port port#
no cpa-client destination
Syntax Description
Command Default None
Command ModesI Interface Linecard Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how configure the destination of the CPA client.
SCE8000>enable 10
password:<cisco>
SCE8000#>config
SCE8000(config)#interface linecard 0
SCE8000(config if)#cpa-client destination 10.10.10.20 port 135
SCE8000(config if)#
Related Commands
ip-address IP address of the destination CPA server.
port# Port number of the CPA server.
Release Modification
3.7.x This command was introduced.
Command Description
show interface linecard cpa-client Displays the current configuration of the CPA client.
Comments to this Manuals