2-153
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
external-bypass
external-bypass
Manually activates the external bypass modules.
To deactivate the external bypass modules, use the no form of this command.
To return the external bypass module to the default state (deactivated), use the default form of this
command.
external-bypass
no external-bypass
default external-bypass
Syntax Description This command has no arguments or keywords.
Command Default The external bypass module is deactivated.
Command Modes Interface Linecard Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to use this command:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#external-bypass
SCE8000(config if)#
Related Commands
Release Modification
3.1.6 This command was introduced.
Command Description
show interface linecard external-bypass Displays the state of the external bypass module.
Comments to this Manuals