2-216
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
ip-tunnel 6to4
Examples The following example shows how to use this command. Note that you must have root level access to
shut down the line card, even though an admin level access is sufficient to run the 6to4 command.
SCE8000> enable 15
Password: <cisco>
SCE8000#> configure
SCE8000(config)#> interface linecard 0
SCE8000(config if)#> shutdown
SCE8000(config if)#> ip-tunnel 6to4
SCE8000(config if)#> no shutdown
Related Commands Command Description
show interface linecard ip-tunnel Displays the current IP tunnel configuration.
Comments to this Manuals