2-189
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
ip address
Examples The following example shows how to set the IP address of the Cisco SCE platform to 10.1.1.1 and the
subnet mask to 255.255.0.0:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface mng 0/1
SCE8000(config if)#ip address 10.1.1.1 255.255.0.0
SCE8000(config if)#
Related Commands Command Description
gigabitethernet interface Enters GigabitEthernet Interface Configuration mode.
interface mng Enters Management Interface Configuration mode.
Comments to this Manuals