2-237
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
link failure-reflection
Examples The following example shows how to enable the reflection of a link failure to all ports (SCE 8000 10GBE
platform only):
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#link failure-reflection on-all-ports
SCE8000(config if)#
The following example shows how to enable the reflection of a link failure. This form of the command
is the only one that can be used on the Cisco SCE 8000 GBE platform (but it can also be used on the
Cisco SCE 8000 10GBE platform).
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#link failure-reflection
SCE8000(config if)#
Related Commands Command Description
link port-enhanced-recovery Enables link port enhanced recovery.
Comments to this Manuals