2-706
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
traffic-rule ipv6
• subscriber-side port — 100
• network-side port — 200
• Direction — downstream
• Traffic counter — counter2
• Action — block
The actions that will be performed by this command are counting and blocking.
SCE8000> enable 10
Password: <cisco>
SCE8000# config
SCE8000(config)# interface linecard 0
SCE8000(config if)# traffic-rule name rule2 ipv6 subscriber-side all network-side all
protocol tcp ports subscriber-side 100 network-side 200 direction downstream
traffic-counter name counter2 action block
SCE8000(config if)
Example 2
The following example shows how to delete all the traffic rules:
SCE8000> enable 10
Password: <cisco>
SCE8000# config
SCE8000(config)# interface linecard 0
SCE8000(config if)# no traffic-rule all
SCE8000(config if)
Related Commands Command Description
show interface linecard traffic-rule Displays the specified traffic rule configuration.
Comments to this Manuals