2-420
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
show hw-bypass mode
show hw-bypass mode
To displays the harware bypass mode status of the Cisco SCE platform, use the show hw-bypass mode
command in the privileged EXEC mode.
show hw-bypass mode
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Privileged EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines The authorization used is root.
Examples The following is the sample output for the show hw-bypass mode command:
SCE8000>enable 15
Password:<cisco>
SCE8000#>show hw-bypass mode
hw-bypass mode is enabled
SCE8000(config)#>
Related Commands
Release Modification
3.7.x This command was introduced.
Command Description
hw-bypass mode Enables the hardware bypass mode of the Cisco SCE platform. It also
allows you to set the hardware bypass state for the specified static parties
when configured in this mode.
Comments to this Manuals