2-695
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
telnet
telnet
Starts a Telnet session.
telnet address [port-number]
Syntax Description
Command Default The default port number is 23.
Command Modes Privileged EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to start a Telnet session:
SCE8000>enable 10
Password:<cisco>
SCE8000#telnet 10.1.5.120
connecting to 10.1.5.120:23...
Related Commands
address Telnet access address.
port-number Optional port number.
Release Modification
2.5.7 This command was introduced.
Command Description
show telnet sessions Displays any active Telnet sessions.
service telnetd Enables the Telnet daemon.
Comments to this Manuals