2-448
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
show interface linecard ip-tunnel 6to4
show interface linecard ip-tunnel 6to4
To display the status of the 6to4 configuration, use the show interface linecard ip-tunnel 6to4
command in user EXEC mode.
show interface linecard slot-number ip-tunnel 6to4
Syntax Description
Command Default None
Command Modes User EXEC (>)
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: viewer
Examples The following example shows how to use this command:
SCE8000> enable 5
Password: <cisco>
SCE8000> show interface linecard 0 ip-tunnel 6to4
6to4 mode is enabled
SCE8000>
Related Commands
slot-number Number of the identified slot.
Release Modification
3.7.5 This command was introduced.
Command Description
ip-tunnel 6to4 Enables 6to4 tunneling when the IPv6 environment is
configured on the Cisco SCE device.
Comments to this Manuals