2-703
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
traffic-rule ip addresses
• Traffic counter name = counter2
• Action = flow-capture
The actions performed will be counting and flow capture.
SCE8000>enable 10
Password:<cisco>
SCE8000#configure
SCE8000(config)#interface linecard 0
SCE8000(config if)#traffic-rule name FlowCaptureRule ip-addresses subscriber-side all
network-side all protocol 250 direction both traffic-counter name counter2 action
flow-capture
SCE8000(config if)#
Related Commands Command Description
show interface linecard traffic-rule Displays the specified traffic rule configuration.
Comments to this Manuals