Cisco SCE8000 Specifications download pdf (Page 680)

100

101

2-640

Cisco SCE 8000 CLI Command Reference

Chapter 2 CLI Command Reference

snmp-server community

Sets a community string.

To remove a community string, use the no form of this command.

snmp-server community community-string [ro | rw] [acl-number]

no snmp-server community community-string [ro | rw] [acl-number]

no snmp-server community all

Syntax Description

Command Default No SNMP access.

Command Modes Global configuration

Command History This table includes the following release-specific history entries:

community-string SNMPv1 and SNMPv2c security string that identifies a community of

managers that can access the SNMP server. It functions much like a

password, permitting access to SNMP.

The community string is 1 to 32 alphanumeric characters. Blank spaces are

not permitted.

Note The @ symbol is used for delimiting the context information. Avoid

using the @ symbol as part of the SNMP community string when

configuring this command.

ro (Optional) Specifies read-only access. Authorized management stations can

only retrieve MIB objects.

rw (Optional) Specifies read-write access. Authorized management stations

can both retrieve and modify MIB objects.

acl-number (Optional) Integer from 1 to 99 that specifies a standard access list of IP

addresses allowed access to the SNMP agent. This ACL is assigned globally

to the SNMP agent, not just to the specified community string.

all (Optional) Used with the no form of the command. Removes all configured

communities.

Release Modification

2.5.7 This command was introduced.

1 2 ... 675 676 677 678 679 680 681 682 683 684 685 ... 777 778

Cisco SCE8000 Specifications Page 680

Comments to this Manuals