Cisco SCE8000 Specifications download pdf (Page 28)

100

101

1-6

Cisco SCE 8000 CLI Command Reference

Chapter 1 Command-Line Interface

Authorization and Command Mode Levels (Hierarchy)

• E4:

–

Cisco SCE 8000 GBE: interface range GigabitEthernet 3/<bay-range (0 | 1 |

0-1)>/<port-range (any range between 0 and 7)>

–

Cisco SCE 8000 10GBE: interface range TenGigabitEthernet 3/<bay-range (any range

between 0 and 3)>/0

• E5: line vty 0

Note Although the system supports up to five concurrent Telnet connections, you cannot configure

them separately. This means that any number you enter in the line vty command (0, 1, 2, 3 or 4)

will act as a 0 and configure all five connections together.

Note In order for the auto-completion feature to work, when you move from one interface configuration mode

to another, you must first exit the current interface configuration mode (as illustrated in the above

figure).

Example:

This example illustrates moving into and out of configuration modes as follows:

1. Enter the global configuration mode.

2. Configure the Cisco SCE platform time zone.

3. Enter MNG (management) interface configuration mode.

4. Configure the speed of the management interface.

5. Exit the MNG configuration mode and enter the global configuration mode.

6. Enter the Linecard interface configuration mode.

7. Define the link mode.

8. Exit the Linecard interface configuration mode and enter the user EXEC mode.

SCE8000#configure

SCE8000(config)#clock timezone PST -10

SCE8000(config)#interface mng 0/1

SCE8000(config if)#speed 100

SCE8000(config if)#exit

SCE8000(config)#interface Linecard 0

SCE8000(config if)#link mode forwarding

SCE8000(config if)#end

SCE8000>

Prompt Indications

The on-screen prompt indicates your authorization level, your command hierarchy level, and the

assigned host name. The structure of the prompt is:

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 777 778

Comments to this Manuals

No comments

Cisco SCE8000 Specifications Page 28

Comments to this Manuals