2-178
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
interface linecard
interface linecard
Enters Interface Linecard Configuration mode.
interface linecard slot-number
Syntax Description
Command Default None
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines The system prompt changes to reflect Linecard Configuration mode. To return to Global configuration
mode, use the exit command.
Authorization: admin
Examples The following example shows how to enter Interface Linecard Configuration mode:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#
Related Commands
slot-number Number of the identified slot. Enter a value of 0.
Release Modification
2.5.7 This command was introduced.
Command Description
exit Exits from the current mode to the next “lower” level.
Comments to this Manuals