2-450
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
show interface linecard ip-tunnel ipinip
show interface linecard ip-tunnel ipinip
Displays the current IPinIP configuration.
show interface linecard slot-number ip-tunnel ipinip
Syntax Description
Command Default None
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: viewer
Examples The following example shows how to use this command:
SCE8000>enable 5
Password:<cisco>
SCE8000>show interface linecard 0 ip-tunnel ipinip
IPinIP skip mode is enabled
IPinIP DSCP skip mode is disabled
SCE8000>
Related Commands
slot-number Number of the identified slot. Enter a value of 0.
Release Modification
3.1.6 This command was introduced.
Command Description
ip-tunnel ipinip skip Enables the recognition of IPinIP tunnels and skipping into
the internal IP packet.
ip-tunnel ipinip dscp-marking-skip Configures the Cisco SCE platform to perform DSCP
marking on the internal IP header of IPinIp traffic.
Comments to this Manuals