Cisco SCE8000 Specifications download pdf (Page 75)

100

101

2-35

Cisco SCE 8000 CLI Command Reference

Chapter 2 CLI Command Reference

attack-filter subscriber-notification ports

Specifies a port as a subscriber notification port. TCP traffic from the subscriber side to this port will

never be blocked by the attack filter, leaving it always available for subscriber notification.

To remove the port from the subscriber notification port list, use the no form of this command.

attack-filter subscriber-notification ports port

no attack-filter subscriber-notification ports port

Syntax Description

Command Default None

Command Modes Interface Linecard Configuration

Command History This table includes the following release-specific history entries:

Usage Guidelines This command configures the port to be used for subscriber notification as configured using the

attack-filter and attack-detector number commands.

Authorization: admin

Examples The following example shows how to specify port 100 as the subscriber notification port:

SCE8000>enable 10

Password:<cisco>

SCE8000#config

SCE8000(config)#interface linecard 0

SCE8000(config if)#attack-filter subscriber-notification ports 100

SCE8000(config if)#

Related Commands

port Port number. One port can be specified as the subscriber notification port.

Release Modification

2.5.7 This command was introduced.

Command Description

attack-detector default Defines default thresholds and attack-handling action.

attack-detector number Configures a specific attack detector for a particular attack

type with the assigned number.

show interface linecard attack-filter Displays the attack-filtering configuration.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 777 778

Comments to this Manuals

No comments

Cisco SCE8000 Specifications Page 75

Comments to this Manuals